tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 1 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? low reverse current level ? very high stability ?low noise ?tzmc - v z -tolerance 5 % ?tzmb - v z -tolerance 2 % ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2.5; 5 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity tzm-series tzm-series-gs18 10 000 (8 mm tape on 13" reel) 10 000/box tzm-series tzm-series-gs08 2500 (8 mm tape on 7" reel) 12 500/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions minimelf sod-80 31 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation r thja ? 300 k/w p tot 500 mw zener current i z p tot /v z ma junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c forward voltage (max.) i f = 200 ma v f 1.5 v
tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 2 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? additional measurement of voltage group tzmc9v1 to tzmc75, i r at 95 % v zmin. ? 35 na at t j = 25 c (1) at t j = 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r i r (1) at v r z z at i zt1 z zk at i zt2 tk vz v ma a v a v ? %/k min. nom. max. typ. typ. min. max. tzmc2v4 2.28 2.4 2.56 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06 tzmc2v7 2.5 2.7 2.9 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 tzmc3v0 2.8 3.0 3.2 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v3 3.1 3.3 3.5 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v6 3.4 3.6 3.8 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v9 3.7 3.9 4.1 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc4v3 4 4.3 4.6 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 tzmc4v7 4.4 4.7 5 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 tzmc5v1 4.8 5.1 5.4 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02 tzmc5v6 5.2 5.6 6 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05 tzmc6v2 5.8 6.2 6.6 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06 tzmc6v8 6.4 6.8 7.2 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07 tzmc7v5 7 7.5 7.9 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07 tzmc8v2 7.7 8.2 8.7 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08 tzmc9v1 8.5 9.1 9.6 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09 tzmc10 9.4 10 10.6 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1 tzmc11 10.4 11 11.6 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11 tzmc12 11.4 12 12.7 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11 tzmc13 12.4 13 14.1 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11 tzmc15 13.8 15 15.6 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11 tzmc16 15.3 16 17.1 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11 tzmc18 16.8 18 19.1 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11 tzmc20 18.8 20 21.2 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11 tzmc22 20.8 22 23.3 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12 tzmc24 22.8 24 25.6 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12 tzmc27 25.1 27 28.9 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12 tzmc30 28 30 32 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12 tzmc33 31 33 35 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12 tzmc36 34 36 38 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12 tzmc39 37 39 41 2.5 0.5 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12 tzmc43 40 43 46 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12 tzmc47 44 47 50 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12 tzmc51 48 51 54 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 tzmc56 52 56 60 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 tzmc62 58 62 66 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 tzmc68 64 68 72 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 tzmc75 70 75 79 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 3 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? additional measurement of voltage group tzmb9v1 to tzmb75, i r at 95 % v zmin. ? 35 na at t j = 25 c (1) at t j = 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r i r (1) at v r z z at i zt1 z zk at i zt2 tk vz v ma a v a v ? %/k min. nom. max. typ. typ. min. max. tzmb2v4 2.35 2.4 2.45 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06 tzmb2v7 2.64 2.7 2.76 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 tzmb3v0 2.94 3.0 3.06 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v3 3.24 3.3 3.36 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v6 3.52 3.6 3.68 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v9 3.82 3.9 3.98 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb4v3 4.22 4.3 4.38 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 tzmb4v7 4.6 4.7 4.8 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 tzmb5v1 5 5.1 5.2 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02 tzmb5v6 5.48 5.6 5.72 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05 tzmb6v2 6.08 6.2 6.32 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06 tzmb6v8 6.66 6.8 6.94 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07 tzmb7v5 7.35 7.5 7.65 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07 tzmb8v2 8.04 8.2 8.36 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08 tzmb9v1 8.92 9.1 9.28 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09 tzmb10 9.8 10 10.2 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1 tzmb11 10.78 11 11.22 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11 tzmb12 11.76 12 12.24 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11 tzmb13 12.74 13 13.26 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11 tzmb15 14.7 15 15.3 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11 tzmb16 15.7 16 16.3 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11 tzmb18 17.64 18 18.36 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11 tzmb20 19.6 20 20.4 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11 tzmb22 21.55 22 22.45 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12 tzmb24 23.5 24 24.5 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12 tzmb27 26.4 27 27.6 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12 tzmb30 29.4 30 30.6 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12 tzmb33 32.4 33 33.6 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12 tzmb36 35.3 36 36.7 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12 tzmb39 38.2 39 39.8 2.5 1 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12 tzmb43 42.1 43 43.9 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12 tzmb47 46.1 47 47.9 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12 tzmb51 50 51 52 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 tzmb56 54.9 56 57.1 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 tzmb62 60.8 62 63.2 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 tzmb68 66.6 68 69.4 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 tzmb75 73.5 75 76.5 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 4 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - total power dissipation vs. ambient temperature fig. 2 - typical change of working voltage under operating conditions at t amb = 25 c fig. 3 - typical change of working voltage vs. junction temperature fig. 4 - temperature coefficient of v z vs. z-voltage fig. 5 - diode capacitance vs. z-voltage fig. 6 - forward current vs. forward voltage 0 120 160 0 100 300 400 500 600 p tot - total po w er dissipation (m w ) t am b - am b ient temperat u re (c) 200 95 9602 200 80 40 10 15 20 1 10 100 1000 v z - v oltage change (m v ) v z - z- v oltage ( v ) 25 95 9598 t j = 25 c i z = 5 ma 0 5 - 60 60 120 180 0.8 0.9 1.0 1.1 1.2 1.3 v ztn - relative voltage change t j - junction temperature (c) 240 95 9599 0 v ztn = v zt /v z (25 c) 0 tk vz = 10 x 10 -4 /k 8 x 10 -4 /k 2 x 10 -4 /k 6 x 10 -4 /k 4 x 10 -4 /k - 4 x 10 -4 /k - 2 x 10 -4 /k - 5 0 5 10 15 v z - z- v oltage ( v ) 95 9600 i z = 5 ma 0 10 203040 50 tk v z - temperat u re coefficient of v z (10 -4 /k) 10 15 0 50 100 150 200 c d - diode capacitance (pf) v z - z- v oltage ( v ) 25 95 9601 20 t j = 25 c v r = 2 v 0 5 0 0.2 0.4 0.6 0.8 0.001 0.01 0.1 1 10 100 1.0 95 9605 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) t j = 25 c
tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 5 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - z-current vs. z-voltage fig. 8 - z-current vs. z-voltage fig. 9 - differential z-resistance vs. z-voltage fig. 10 - thermal response 8 20 95 9604 0 20 40 60 80 100 i z - z-c u rrent (ma) p tot = 500 m w t am b = 25 c 046 12 v z - z- v oltage ( v ) 15 20 25 30 0 10 20 30 40 50 i z - z-c u rrent (ma) v z - z- v oltage ( v ) 35 95 9607 p tot = 500 m w t am b = 25 c 0 101520 1 10 100 1000 25 95 9606 t j = 25 c i z = 1 ma 5 ma 10 ma v z - z- v oltage ( v ) r z - differential z-resistance ( ) 5 1 10 100 1000 z thp - thermal resistance for p u lse cond. (k/ w ) t p - p u lse length (ms) 95 9603 10 -1 10 0 10 1 10 2 t p /t = 0.5 t p /t = 0.2 t p /t = 0.1 t p /t = 0.05 t p /t = 0.02 t p /t = 0.01 single p u lse r thja = 300 k/ w t = t j max. - t am b i zm = (- v z + ( v z 2 + 4r zj x t/z thp ) 1/2 )/(2r zj )
tzm-series www.vishay.com vishay semiconductors rev. 1.6, 22-nov12 6 document number: 84122 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indentification 0.47 (0.019) max. 2.5 (0.098) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print re commendation: * * the gap b et w een pl u g and glass can b e either on cathode or anode side doc u ment no.:6.560-5005.01-4 re v . 8 - date: 07.j u ne.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
